Replacement Hydac 00304 Series Filter Elements

Welcome to "Saar Hydraulic", your one-stop hydraulics components resource. Our experienced team has a wealth of experience in supplying hydraulic pumps, valves,cylinders,filters,filter elements.

Filter Media 00304 Series

The media that we offer in the Hydac 00303 Series is Sintered Stainless Steel and is ideal for hydraulic applications where fire resistant fluids are utilized, including EHC for power generation, jack-up/lift-up systems for turbine start up, governor control circuit for turbine speed and primary metal applications. EHC systems commonly use phosphate ester which can develop high TAN (total acid number) when exposed to water. The acid attacks the binding agent in Microgalss media. The result is lower efficiency and media migration, or fiber shedding, where the filter is generating contamination. Sintered steel filter media utilize sintered stainless steel fibers which are impervious to the acidic compounds that form in EHC systems.

At "Saar Hydraulic" we insist on providing our customers with the highest quality of filtration products. As a result, all of our replacement elements are manufactured right here in China, under the most rigorous quality standards. Additionally, all of our filter elements carry ISO Standards and we fully guarantee all of our products. We offer the below 00304 Series: Hydac 00304000Hydac 00304081Hydac 00304082Hydac 00304109Hydac 00304110

<style> .content_format table{border:1px solid #dedede; border-collapse:collapse;} .content_format td{ padding:3px; border: 1px solid #dcdcdc; } .content_format { line-height: 24px; word-wrap : break-word ; } .content_format p{ margin-bottom: 10px; margin-top: 2px; padding: 2px; } </style>
filteration filter elements Replacement Hydac 00304 Series Filter Elements
Eaton’s hydraulic filtration product line features more than 4,000 high-quality filter elements with a high dirt-holding capacity to ensure consistent filter efficiency and long element life. These elements are available with various filter materials, different construction types and micron ratings to help protect critical system components.
Eaton’s wide range of filter elements provide trouble-free operation when filtering abrasive fluids, cooling lubricants or water-based fluids and are designed to achieve cleanliness class requirements. Eaton can perform fluid analysis on-site or in our lab to determine the best filter element for your hydraulic and lubrication system requirements.
FeaturesDocumentationInquiries
Deep filtration
Absolute Filtration
High particle holding capacityv Best micron rating at high
Usable for mineral oils, emulsions and for most synthetic hydraulic fluids and lubrication oils
Various grades of filter fineness available (1 VG, 3 VG, 6 VG, 10 VG, 16 VG and 25 VG), other grades of filter fineness on request
Special filter design for lubrication applications available (10 API and 25 API)
Deep Filtration
Nominal Filtration
Constructed of paper and polyester fiber
High material stability and strength
Available in 10 μm
Stainless steel wire mesh
Surface Filtration
Nominal Filtration
Provides high resistance filter elements (irrespective of the hydraulic fluid used)
Partially cleanable
Available in 25 μm, 40 μm and 80 μm, other micron ratings on request
In addition to proprietary tests developed by Eaton, filter elements are tested according to several ISO Standards:
ISO 2941 Verification of collapse/burst pressure rating
ISO 2942 Verification of fabrication integrity
ISO 2943 Verification of material compatibility with fluids
ISO 3723 Method for end load test
ISO 3724 Determination of resistance to flow fatigue using particulate contaminant
ISO 3968 Evaluation of pressure drop versus flow characteristics
ISO 16889 Multi-pass method for evaluating filtration performance